hdpe geogrid hdpe unixial geogrid

hdpe geogrid pe uniaxial geogrid strength: 60, 80, 120, 160 size: 1m x 50m reinforcement geogrid for wall deck steep slope

hdpe geogrid

hdpe uniaxial geogrid

polyethylene uniaxial geogrid

1,  It provide slope stabilization for Retaining Wall System.

1.1  It is high strength polymer gird structures that form an extremely efficient reinforcing

by performing as a network of distributed anchors within a soil matrix.

1.2  It was manufactured by a process of extruding, punching, heating and longitudinal

Stretching, it was made of High Density Polyethylene, which is chemically inert,

unaffected by the U.V. rays and fully resistant to aging in the soil environment.

1.3 The characteristic material properties associated with our geogrids include:

   1.31 resistance to biological degradation or attack

   1.32 chemical resistance

   1.33 weathering resistance from UV degradation through incorporating additive

of carbon black

   1.34 resistance to aging from oxidation since much of the material incorporates antioxidants

   1.35 environmental stress cracking will not effect their performance.

2, HDPE Uniaxial Geogrid --- PEUG60

2.1 Introduction

It was manufactured from High Density Polyethylene. It is produced through the process

of extruding, punching, heating and stretching.

2.2 Performance

¨ High tensile strength

¨ Low creep deformation

2.3 Applications

¨ Reinforcing for retaining wall, deck and steep slope.

Mainly used in the highway, railway, retaining wall, dam, deck and steep lope.

2.4 Benefits

¨ Improving bearing capacity of retaining wall or dam

¨ Extending the project life

¨ Reducing floor area

¨ Shortening construction period, reducing cost and maintaining expense

2.5 Specifications:

Index  Properties                   Test Method         Units     MD Values

¨ Polymer-                                                                                                         HDPE

¨ Minimum Carbon Black                            ASTM D 4218       %                     2

¨ Tensile Strength @ 2% Strain                   ASTM D 6637       kN/m             16

¨ Tensile Strength @ 5% Strain                   ASTM D 6637       kN/m             31

¨ Ultimate Tensile Strength                          ASTM D 6637       kN/m             60

¨ Strain @ Ultimate Strength                       ASTM D 6637       %                 10

¨ Flexural Rigidity                                       ASTM D 1388       mg-cm         1,400,000

Durability

¨ UV Resistance                                         ASTM D 4355       %                     98

¨ Oxidation Resistance                              EN ISO 13438       %                     100

¨ Brittleness                                              WashDOT T926                                   Pass

Dimensions

¨ Roll Width                      1m

¨ Roll Length                     75m

¨ Roll Weight                     34kg

3, HDPE Uniaxial Geogrid PEUG80

3.1 Introduction

It was manufactured from High Density Polyethylene. It is produced through the process

of extruding, punching, heating and stretching.

3.2 Performance

¨ High tensile strength

¨ Low creep deformation

3.3 Applications

¨ Reinforcing for retaining wall, deck and steep slope.

Mainly used in the highway, railway, retaining wall, dam, deck and steep lope.

3.4 Benefits

¨ Improving bearing capacity of retaining wall or dam

¨ Extending the project life

¨ Reducing floor area

¨ Shortening construction period, reducing cost and maintaining expense

3.5 Specifications:

Index Properties                                        Test Method         Units         MD Values

¨ Polymer                                                          -                                    -           HDPE

¨ Minimum Carbon Black                            ASTM D 4218           %                      2

¨ Tensile Strength @ 2% Strain                   ASTM D 6637           kN/m                  23

¨ Tensile Strength @ 5% Strain                   ASTM D 6637           kN/m                  44

¨ Ultimate Tensile Strength                          ASTM D 6637           kN/m                  80

¨ Strain @ Ultimate Strength                       ASTM D 6637           %                      10

¨ Flexural Rigidity                                       ASTM D 1388           mg-cm                2,300,000

Durability

¨ UV Resistance                                         ASTM D 4355           %                    98

¨ Oxidation Resistance                              EN ISO 13438           %                    100

¨ Brittleness                                              WashDOT T926           -                     Pass

Dimensions

¨ Roll Width                     1m 

¨ Roll Length        -          50m 

¨ Roll Weight                    30kgs 

hdpe geogrid hdpe unixial geogrid